SOEiQ
SOEiQ

أدوات SOEiQSOEiQ tools

ما تفعله كل أداة، ومتى تحتاجها، وكيف تعمل. الأدوات الست مفتوحة للجميع وتعمل في الصفحة نفسها دون رفع الملف، وتحليل الأعطال في المنصة يتطلب تسجيل الدخول.What each tool does, when you need it and how it works. The six tools are open to everyone and work in the page itself without uploading the file; fault analysis in the platform needs sign-in.

1

تحليل الأعطال · SOEiQFault analysis · SOEiQ

للأعضاءMembers

المنصة نفسها: تحليل كامل لتسجيل العطل وسجل الأحداث، مع مساعد الحماية وتقرير PDF.The platform itself: a full analysis of the fault recording and the event log, with the protection assistant and a PDF report.

متى تحتاجهاWhen you need it

بعد كل فصل تحتاج أن تعرف نوع العطل، وهل عملت الحماية في وقتها، وأن توثّق ذلك في تقرير.After every trip, when you need the fault type, whether protection operated in time, and a report that documents it.

كيف تعملHow it works

  1. أضف ملف COMTRADE أو سجل SOE.
  2. راجع نوع العطل وأزمنة الحماية وتسلسل الأحداث (SOE).
  3. اسأل مساعد الحماية، ثم اعتمد التقرير وحمّله.
  1. Add a COMTRADE file or an SOE log.
  2. Review the fault type, protection timing and the sequence of events.
  3. Ask the protection assistant, then approve the report and download it.
ابدأ التحليلStart analysis
2

فحص ملف COMTRADECOMTRADE file check

مفتوحة للجميعOpen to everyone

يقرأ الملف ويخبرك هل هو سليم: الإصدار، القنوات، معاملات التحويل، عدد العينات، والوقت.Reads the file and tells you whether it is sound: revision, channels, conversion factors, sample count and time.

متى تحتاجهاWhen you need it

قبل أن تعتمد على تسجيل، أو حين يرفض برنامج آخر فتحه.Before you rely on a recording, or when another program refuses to open it.

كيف تعملHow it works

  1. اختر ملفي .cfg و.dat أو ملف .cff.
  2. اقرأ الحكم: سليم، أو فيه ملاحظات، أو لا يُقرأ.
  3. راجع كل فحص ومرجعه في المعيار.
  1. Choose the .cfg and .dat files, or a .cff file.
  2. Read the verdict: sound, has remarks, or unreadable.
  3. Go through each check and its clause in the standard.
افتح الأداةOpen the tool
3

تحويل COMTRADE إلى CSVCOMTRADE to CSV

مفتوحة للجميعOpen to everyone

يحوّل التسجيل إلى جدول يُفتح في Excel أو Python أو MATLAB، بالقيم الابتدائية أو الثانوية.Converts the recording to a table that opens in Excel, Python or MATLAB, in primary or secondary values.

متى تحتاجهاWhen you need it

حين تريد رسم الموجات أو معالجتها بأدواتك.When you want to plot or process the waveforms with your own tools.

كيف تعملHow it works

  1. اختر ملفات التسجيل.
  2. اختر القيم الابتدائية أو الثانوية والقنوات.
  3. حمّل ملف CSV.
  1. Choose the recording files.
  2. Pick primary or secondary values and the channels.
  3. Download the CSV file.
افتح الأداةOpen the tool
4

حاسبة منحنيات IDMTIDMT curve calculator

مفتوحة للجميعOpen to everyone

تحسب زمن عمل مرحّل زيادة التيار (Overcurrent relay) وترسم منحنياته وفق IEC 60255-151 وIEEE C37.112، وتعرض هامش التنسيق (Grading margin) بين مرحّلين.Calculates the operating time of an overcurrent relay and draws its curves to IEC 60255-151 and IEEE C37.112, and shows the grading margin between two relays.

متى تحتاجهاWhen you need it

عند مراجعة إعدادات TMS، أو التحقق من تنسيق مرحّل مع الذي قبله.When reviewing TMS settings, or checking the grading of a relay with the one upstream.

كيف تعملHow it works

  1. اختر نوع المنحنى لكل مرحّل.
  2. أدخل تيار الالتقاط (Pickup) وTMS وتيار العطل.
  3. اقرأ زمن العمل وهامش التنسيق على الرسم.
  1. Choose the curve type for each relay.
  2. Enter the pickup current, TMS and fault current.
  3. Read the operating time and the grading margin on the chart.
افتح الأداةOpen the tool
5

فحص ITIC وSEMI F47ITIC and SEMI F47 checker

مفتوحة للجميعOpen to everyone

يضع انخفاض الجهد (Sag) أو ارتفاعه (Swell) على منحنى ITIC (CBEMA) ومنحنى SEMI F47، ويذكر تصنيفه.Places a voltage dip or swell on the ITIC (CBEMA) curve and the SEMI F47 curve, and gives its category.

متى تحتاجهاWhen you need it

حين تسأل: هل كان يُفترض أن تتحمل الأجهزة هذا الانخفاض؟When the question is: should the equipment have ridden through this dip?

كيف تعملHow it works

  1. أدخل الجهد المتبقي بالنسبة المئوية.
  2. أدخل مدة الحدث.
  3. اقرأ موضعه على المنحنيين.
  1. Enter the remaining voltage in percent.
  2. Enter the duration of the event.
  3. Read where it falls on both curves.
افتح الأداةOpen the tool
6

ملفات نموذجيةSample files

مفتوحة للجميعOpen to everyone

تسجيلات COMTRADE مصنوعة بالمحاكاة: أعطال، إعادة إغلاق (Auto-reclose)، تيار اندفاع (Inrush)، وانخفاض جهد (Sag) خارجي.Simulated COMTRADE recordings: faults, auto-reclose, inrush and an external voltage dip.

متى تحتاجهاWhen you need it

للتجربة والتدريب، أو لاختبار قارئ ملفات. ليست تسجيلات من شبكة حقيقية.For trying things out, training, or testing a file reader. They are not recordings from a real network.

كيف تعملHow it works

  1. اختر التسجيل المناسب.
  2. حمّله، أو افتحه مباشرة في فحص الملف.
  3. جرّبه في المنصة.
  1. Pick the recording you need.
  2. Download it, or open it directly in the file check.
  3. Try it in the platform.
افتح الصفحةOpen the page
7

تحويل تقارير SEL إلى COMTRADESEL reports to COMTRADE

مفتوحة للجميعOpen to everyone

يحوّل تقرير أحداث مرحّل SEL، المضغوط (.CEV) أو النصي (.EVE)، إلى COMTRADE يفتح في أي برنامج تحليل، ومعه بتات كلمة المرحّل وإعداداته.Converts an SEL relay event report, compressed (.CEV) or ASCII (.EVE), into COMTRADE that opens in any analysis program, with the relay word bits and the settings.

متى تحتاجهاWhen you need it

حين يكون التقرير من مرحّل SEL وبرنامج التحليل عندك لا يقرأ إلا COMTRADE، أو حين تريد أن تحفظ الحدث بصيغة المعيار.When the report comes from an SEL relay and your analysis program only reads COMTRADE, or when you want to keep the event in the standard format.

كيف تعملHow it works

  1. اختر ملف .CEV أو .EVE.
  2. اختر البتات: التي تتغير فقط، أو كلها.
  3. حمّل ملف ZIP فيه CFG وDAT وHDR.
  1. Choose a .CEV or .EVE file.
  2. Choose the bits: only those that change, or all.
  3. Download a ZIP with the CFG, DAT and HDR.
افتح الأداةOpen the tool

شروحات وتوضيحاتShort guides

شرح ملف CFGThe CFG file explainedشرح ملف DATThe DAT file explainedتنسيق مرحّلات زيادة التيارGrading overcurrent relays

تريد أن ترى المنصة أولًا؟ أربع خطوات من الملف إلى التقرير.Want to see the platform first? Four steps from file to report.

كيف يعمل SOEiQHow SOEiQ works