المنحنيان
- ITIC (2000): الحد الأدنى لا قيد عليه دون 20 مللي ثانية، ثم 70% حتى نصف ثانية، و80% حتى 10 ثوانٍ، و90% بعدها. والحد الأعلى 140% حتى 3 مللي ثانية، و120% حتى نصف ثانية، و110% بعدها.
- SEMI F47-0706: 50% من 20 إلى 200 مللي ثانية، و70% حتى نصف ثانية، و80% حتى ثانية واحدة. ولا يحدد ما قبل 20 مللي ثانية ولا ما بعد الثانية.
- وما معنى موضع النقطة؟ تحت منحنى ITIC قد تتوقف الأجهزة دون أن تتلف، وفوقه (المنطقة المحظورة، Prohibited region) قد تتلف.
- فئات IEEE 1159: الانخفاض (Sag) والارتفاع (Swell) لحظي (Instantaneous) من نصف دورة إلى 30 دورة، ومؤقت قصير (momentary) حتى 3 ثوانٍ، ومؤقت (temporary) حتى دقيقة، وبعدها طويل المدة. والانقطاع (Interruption)، أي أقل من 10%، مؤقت قصير حتى 3 ثوانٍ، ومؤقت حتى دقيقة، ثم مستمر.
المنحنيان يصفان تحمّل الأجهزة كما تحدده المعايير، ولا يثبتان أن جهازًا بعينه استمر في العمل. الحدود هنا هي نفسها التي يستعملها محرك منصة SOEiQ.
The two curves
- ITIC (2000): the lower edge has no limit below 20 ms, then 70% to 0.5 s, 80% to 10 s and 90% beyond. The upper edge is 140% to 3 ms, 120% to 0.5 s and 110% beyond.
- SEMI F47-0706: 50% from 20 to 200 ms, 70% to 0.5 s and 80% to 1 s. It says nothing below 20 ms or beyond 1 s.
- Below ITIC: equipment may stop, without damage. Above it (the prohibited region): equipment may be damaged.
- IEEE 1159 categories: sags and swells are instantaneous from half a cycle to 30 cycles, momentary to 3 s, temporary to 1 min, then long duration. Interruptions (below 10%) are momentary to 3 s, temporary to 1 min, then sustained.
The curves describe equipment tolerance as the standards set it; they do not prove that a given device kept working. The limits are the same ones the SOEiQ platform engine uses.