يجري التحويل في هذه الصفحة، والملف لا يصل إلى خوادمنا.
The conversion runs in this page; the file never reaches our servers.
ما الذي تحصل عليه
- ملف ZIP فيه ثلاثة ملفات COMTRADE بمراجعة 1999 (IEEE C37.111): CFG للوصف، وDAT للعينات بصيغة ASCII، وHDR فيه ملخص الحدث وإعدادات المرحّل كما جاءت في التقرير.
- القنوات التماثلية بالقيم الأولية كما يكتبها المرحّل (التيار بالأمبير، والجهد بالفولت بعد تحويل kV). وتُحفظ القيم بأعداد صحيحة ومعامل لكل قناة، فخطأ التقريب أقل من نصف وحدة من 32000 جزء من أعلى قيمة في القناة.
- بتات كلمة المرحّل (من .CEV) قنوات رقمية: البتات التي تتغير أثناء التسجيل، أو كلها إن اخترت ذلك. والبتات الاحتياطية «*» لا تُكتب.
- الزمن: وقت الإطلاق من التقرير، ووقت البدء محسوب منه بعدد العينات قبل صف الإطلاق.
- تقرير .EVE لا تُقرأ منه أعمدة العناصر الرقمية، لأن أسماءها مكتوبة عموديًا وتختلف بين الطرازات. لأزمنة العناصر استعمل تقرير .CEV للحدث نفسه.
What you get
- A ZIP with three COMTRADE 1999 files (IEEE C37.111): the CFG description, the DAT samples in ASCII, and an HDR with the event summary and the relay settings as carried in the report.
- Analog channels in primary values as the relay writes them (amps; volts after converting kV). Values are stored as integers with a factor per channel, so rounding stays under half a step of 1/32000 of the channel's peak.
- Relay word bits (from a .CEV) as digital channels: the bits that change during the record, or all of them if you choose. Spare bits ("*") are left out.
- Time: the trigger time from the report, and the start time worked back from the rows before the trigger row.
- The element columns of an .EVE report are not read: their names are written vertically and differ between models. For element timing use the .CEV report of the same event.